3+ Fixes For 0xc0000005 Errors

In this post, we’ll provide 3+ fixes (and video guides) for dealing with 0xc0000005 errors.

There are times when you play a video and the sound suddenly goes off. If it happens without you even pressing the mute button or removing the sound yourself, then it could be due to an error called 0xc0000005.

Social Reaction

error code 0xC0000005 will haunt all my nightmares

— audrey (@mintyproof) July 14, 2019

Microsoft sent me a hotfix for 0xc0000005, in my dream today 🤣

— Kagami S. Rosylight (@saschaplas) July 19, 2019

When these installs keep failing at 0xc0000005 squwaak, does the machine automatically send full info back to MSFT? Bugged it again. 🙁

— Pete Schmidt (@oldsnowdrift) July 11, 2019

What is 0xc0000005?

The application error known as 0xc0000005 could happen due to the improper processing of files and settings that are needed in running a specific program or installation. It can be caused by a variety of factors such as an access violation error, faulty RAM, or an installation error.

How to Fix the 0xc0000005 Error

Video Guide: How To Fix Error Code 0xc0000005 In Windows 7 8 10

This can be remedied, however, based on the underlying cause. These fixes might just help you:

1st Fix: Using System File Checker

According to Aileen Alf, a Microsoft Agent and forum moderator at the Microsoft Community Forum, you have to check for any files in the Windows system that may have been corrupted. The System File Checker (SFC) can help you to scan for corrupt files, and if there appears to be a problem, the system files will be replaced with a cached version originating from the PC.

To do this, you simply have to follow these steps:

1. Go to your Start menu and type command prompt
2. Once the Command Prompt option appears, right-click on it then select Run as administrator. This will open an elevated command prompt with administrative rights.
3. At the command prompt, type sfc /scannow (note the space between sfc and the /). Wait for a few minutes for the scan to complete (this may vary depending on your system).
4. If SFC discovered any corrupted files, it will replace them.
5. Then, restart your PC then check if the issue has been fixed or not.

Video Guide: How To Run System File Check (sfc scannow)

2nd Fix: Fixing an Access Violation Error

According to Jonny Lin of DriverEasy, this kind of error happens if a program being run is going after a location that had not been assigned to it. There are ways to troubleshoot the problem. You can either:

a. Run the security software to look for any malware which can cause the error. Afterward, run a virus scan to determine if there is a need to do more troubleshooting.

b. Deactivate the affected program’s Data Execution Prevention (DEP), which is a feature intended to protect your computer. This feature can be incompatible with some programs, thereby leading to the error. To disable the DEP, here are the steps you should follow:

1. Log in as Administrator.
2. Open the Run window by pressing Windows key and R simultaneously.
3. In the Run window, type sysdm.cpl then hit Enter.
4. Go to the Advanced tab, then click on the Settings button under the Performance section.
5. Head to the Data Execution Prevention tab then select the “Turn on DEP for all programs and services” option. Click Add afterward.
6. Look for the problematic .exe files and click OK.

c. If the problem lies with a corrupted Registry, restore it or check its entries and remove any entries deemed redundant. One problem with this approach is the complexity behind the work. There could be some unintended consequences that could potentially harm the Registry. You should ask an expert to help you in order to do so.

d. An incompatible Random Access Memory (RAM) can cause the problem. It can be remedied by cutting the power from the computer and removing the RAM to replace it. Prior consultation is needed before proceeding, as this approach requires the disassembly of your computer.

Video Guide: Access Violation Error Fix

3rd Fix: Resolving a Problematic Startup

There might also be problems when you attempt to start up an application and it crashes, displaying a message that says “The application was unable to start correctly.” Jonny Lin of DriverEasy also offers some tips on how to fix this sort of problem:

a. There might be malware causing the problem. Scan the computer to root out the cause. At times, it could also be due to security software. Perhaps disabling it might show some change.

b. The error could also be due to improper modification on the registry. Restoring the registry to a backup helps, but you can always search for an entry that has been defective and repair it with help from an expert. Before performing any modification, try to back up the Registry to ensure no untoward changes take place.

c. There might have also been changes on the computer that are inconsistent with the operating system which started to cause bugs. In some cases, it could be due to an installation of a different application that caused the 0xc0000005 error. The application can be uninstalled, but if you are unconvinced that this is the cause of the problem, then you will need to run a System Restore You can choose to undo the changes or perhaps uninstall the program to fix the error. To do this, follow these steps.

1. Click the Start button then type “restore“.
2. Click on System Restore from the results.
3. In the Wizard, follow what it says on how to find a restore point. From there, you can complete the restoration process.

d. There might be some issues with the Boot Configuration Data. To fix the Boot Configuration Data, you will need to do the following:

1. Set up Windows installation media on your computer. Start your computer using the media. A Setup window will pop up on the screen.
2. Open Command Prompt in the media. If you are a Windows 10 user, click Next and then Repair computer. Afterwards, troubleshoot it and open the Command Prompt.
3. In the Command Prompt, type the following lines. Make sure you press Enter for every line:

• del d:windowssystem32xntkrnl.exe
• del d:windowssystem32xosload.exe
• del d:windowssystem32driversoem-drv64.sys
• attrib c:bootbcd -h -r –s
• ren c:bootbcd bcd.old
• bootrec /rebuildbcd

4. Close the Command Prompt window and restart your computer. Once you’re done, check to see if you get rid of the error.

Video Guide: How to Fix Windows 7 / Windows 8 / 10 Start-up Problems – Blackscreen – Bootloop

Forum Feedback

To collect information about application error 0xc0000005, we searched through several Microsoft support forums and Reddit message boards. In general, computer users were interested in what 0xc0000005 is and how to fix 0xc0000005.

Hardware Issues?

A forum member shared that he recently encountered application error 0xc0000005 and that it prevented him from working normally on his laptop because he had no sound and couldn’t connect to the internet.

• So, he asked for advice, and Microsoft support suggested that he should run the system file checker to detect and repair corrupted files.
• To do that he had to press Win+R, type cmd in the RUN box, press “Enter,” and then type sfc /scannow.
• They explained that this application error might be the result of many different problems, including hardware ones.

Do A Special Reset

Another computer owner also had the same problem, and when he attempted to check for damaged files, he still got the same application error. Other Reddit users stated that he should try to reset his computer by going to Settings > Updates and Security > Recovery > Reset the PC > Get Started. Then he should choose to keep his files or reset everything.

 

Check For Damaged Files

A computer expert points out that error 0xc0000005 appears in three different situations – access violation error, application unable to start, or Windows installation error. He adds that the first thing you should do is check for damaged files, and then you must run your antivirus program to scan for malicious software, which might be causing the issue. If you don’t have any success with these two options, the user remarks that the problem might be a more serious one, and you should consult a professional before attempting to fix it on your own.

Use The Office Repair Tool

Another commentator mentions that he can’t access his Office because he keeps getting error 0xc0000005. Other members of the community advised him to run the Office Repair tool by going to Apps and Features and finding the Office product causing the problem. Then you have to click on Modify and then select repair. However, they warned him that the tool would repair the entire office packet. If that didn’t work, he was advised to uninstall Microsoft Office and install it again.

Data Execution Prevention

A person remarks that some programs are not compatible with Data Execution Prevention and that in these cases, you’re likely to encounter the 0xc0000005 error. That’s why you should try to disable it by pressing Windows key+R and then type sysdm.cpl. Then hit Enter > System Properties > Advanced > Performances > Settings > Data Execution Prevention > Select ‘Turn on DEP for all programs and services except those I Select’. Then you must add the problematic exe file to the exception list and click Ok.

 

Faulty RAM?

Another poster also states that you might come upon this application error while you’re installing Windows. In these cases, the problem is most likely a hardware one such as faulty RAM or failing hard drive. So, he advises that you take your device to a professional for a full diagnostic.

Faulty Drivers

A user also mentions that if you can’t start a program due to the 0xc0000005 error, you might be dealing with faulty drivers.

• So, you should update all your drivers and scan the system for corrupted drivers.
• The other possibility is that you have recently installed a new program that has made changes to your operating system or it is incompatible with your system.
• The solution would be to use System Restore and roll back your system.
• However, that’s possible only if you have created a restoration point. If you haven’t you should uninstall any new programs using Control Panel.

Corrupted Registry File

Another forum member observes that a corrupted registry file also might result in an 0xc0000005 error. However, he warned that you shouldn’t attempt to mess up with the registry unless you know what you’re doing because it might affect your whole system.

A person reports that starting a computer in Clean Boot might resolve the problem because it would start Windows with only the minimal necessary programs.

• The user also comments that damaged Boot Configuration Data files might also lead to 0xc0000005 errors.
• In this case, you’ll need Windows installation media to repair BCD, and you might need to activate your Windows again.
• The person recommends that you don’t do it on your own unless you are familiar with the process.

Check Permissions

Another user reports that he had some issues with a Windows installation and error 0xc0000005. It turned out that he didn’t have full permission to do the action and that what triggering the error.

Conclusion

The 0xc0000005 error can be quite a hassle for the operations of your computer. Nevertheless, you might want to try each of the fixes in order to prevent more of the same error from happening again. Do keep in mind, however, that these fixes might not fix the problem for you. In such a case, you might want to contact professionals for assistance.